Guides · Updated 2026-10-27 · 8 min read

MP4 vs GIF vs WebP for 3D Model Previews

A short rotating preview sells a 3D model better than a still picture, but the format you choose decides how fast it loads, how good it looks and whether a marketplace accepts it. We rendered the same 4-second turntable and encoded it as MP4, animated WebP and GIF, so this guide can give measured file sizes instead of rules of thumb.

Written and tested by Azim, creator of STLtoMP4, who publishes 3D models and preview media on Cults3D. The numbers on this page come from test files and clips that were generated for this article (the method is described at the end), not from copied tables. Last reviewed 2026-10-27. Spotted a mistake? Tell us.

Measured results

Test clip: 640 x 640 pixels, 30 frames per second, 120 frames (4 seconds, one full turn), a shaded and textured object on a light background.

Format and settingsFile sizeCompared with MP4 (CRF 23)
MP4, H.264, CRF 300.15 MB44%
MP4, H.264, CRF 230.34 MB100%
Animated WebP, quality 701.29 MB3.8 times larger
GIF, 320 x 320, 64 colours3.27 MB9.7 times larger
GIF, 640 x 640, 128 colours16.13 MB48 times larger
GIF 640 x 64016.13 MBGIF 320 x 3203.27 MBAnimated WebP q701.29 MBMP4 CRF 230.34 MBMP4 CRF 300.15 MB

What this shows

Why the differences are so large

MP4 (H.264) stores differences between frames and uses motion prediction. A turntable keeps the background still and moves the object smoothly, which is a good case for video codecs. GIF stores every frame as an indexed-colour image with only simple lossless compression, so it cannot exploit smooth motion or gradients. WebP can use video-like techniques, but its animated mode has less encoder support and less hardware decoding than H.264.

Compatibility and behaviour

MP4Animated WebPGIF
ColoursMillionsMillions256 at most per frame
TransparencyNoYes1-bit only
AudioYesNoNo
Autoplay and loop in web pagesYes, muted with the loop attributeYes, as an imageYes, as an image
Supported by marketplaces and social sitesAlmost alwaysVariesOften
Hardware decoding on phonesYesLimitedNo

Platform rules change, so check the upload page of the site you use for accepted types and size limits.

Which format should you pick?

How to keep any preview small

  1. Use a plain background. Flat areas cost almost nothing in MP4 and compress well in every format.
  2. Shorten the loop. File size scales with duration.
  3. Lower the frame rate to 24 or 20 for slow rotations.
  4. Match the resolution to the display: 720 to 1080 pixels is enough for most listings.
  5. For MP4, increase CRF or lower the bitrate until artefacts appear, then step back.

The STLtoMP4 tool exports MP4 with adjustable resolution, frame rate and bitrate, and can also produce a GIF. See how to make a turntable video for camera, lighting and duration advice.

Frequently asked questions

Why is my GIF so big?

GIF stores every frame as an indexed image with only basic compression. In our test the same clip was about 48 times larger as a 640-pixel GIF than as an MP4.

Can I upload MP4 where only GIF is allowed?

Only if the platform accepts it. Some sites convert uploaded videos automatically; others do not.

Is WebP better than GIF?

Usually yes for size and colour, but support is less universal than GIF or MP4.

How we measured

The clip is 120 frames of a lit, textured sphere rotating a full turn on a light background, generated programmatically for this article. It was encoded with FFmpeg 6.1: libx264 with -crf 23 and -crf 30 (yuv420p), libwebp animated at quality 70, and GIF with a generated palette (128 colours at 640 pixels with Bayer dithering; 64 colours at 320 pixels). A real model with fine texture or noisy lighting will produce larger files in every format, but the order and the rough ratios stay similar. The numbers are in a CSV file.

Try it yourself: convert your own model to an MP4 turntable video and preview images for free in your browser at STLtoMP4.com. Your files never leave your device.

Related guides

Browse all guides