3D Printing and 3D Model Guides

Practical, plain-language guides for makers who design, print and sell 3D models. They cover file formats, scale and orientation problems, pre-print checks, print settings, material estimates, preview videos and images, and writing listings that answer buyers' questions.

Guides with original data and tools

These guides include measurements we made for this site and interactive calculators that run in your browser.

How to Reduce STL File Size (with measured sizes and an estimator)

The same mesh written as binary STL, ASCII STL, OBJ, PLY and 3MF, with a file size estimator.

STL vs 3MF vs OBJ vs PLY (with measured sizes)

Feature comparison, measured sizes and a decision table by use case.

MP4 vs GIF vs WebP for 3D previews (measured)

One turntable clip encoded three ways: real file sizes and format advice.

Filament weight and cost calculator

Formula, densities, worked examples and why small prints use more filament.

File preparation and printing

STL vs 3MF vs OBJ vs PLY: Which 3D File Format Should You Use?

A practical comparison of STL, 3MF, OBJ and PLY: what each format stores, where it breaks, how large the files get and when to pick each one.

Why Your STL Looks Too Small, Too Big or Upside Down

STL files carry no units and no up direction. Learn why models import at the wrong size or rotation, and how to correct scale, axis and base.

How to Check an STL File Before You Print or Sell It

A practical pre-print checklist: watertight meshes, flipped normals, wall thickness, overhangs, flat base, clearances and the tools that repair problems.

How to Reduce STL File Size Without Losing Visible Detail

Why STL files get huge and how to shrink them: binary export, decimation, triangle budgets, removing hidden geometry, 3MF and zip compression.

Layer Height, Infill and Walls: What Each Setting Really Does

A plain explanation of the three print settings that matter most: layer height, infill and wall count, with ranges, trade-offs and starting points.

How to Estimate 3D Print Weight and Filament Cost from an STL

Estimate filament weight and cost from model volume, material density and infill, with worked examples and a table of common densities.

How it works, cameras, scenes and reference

How STLtoMP4 Works: Rendering and Encoding in Your Browser

What happens between dropping a model on the page and downloading the MP4: parsing, WebGL rendering, WebCodecs encoding, privacy and limits.

Camera Angles for 3D Model Videos: Beyond the Turntable

Eye level, three-quarter, high and low angles, orbit, sweep and fly-over, plus a reusable shot list for product and 3D print previews.

Choosing a Scene and Background for 3D Model Previews

Plain, photo or 3D room backgrounds, how to make the object sit on its surface, and how to size previews for phones.

Troubleshooting STL to MP4: Black Frames, Slow Renders and Files That Will Not Play

Fixes for black models, wrong framing, slow exports on phones and MP4 files that will not play or upload.

3D Model, Rendering and Video Glossary

Short definitions of STL, OBJ, 3MF, normals, manifold, elevation, bitrate, H.264, WebCodecs and other terms.

STL Dosyası Nedir? 3D Baskı İçin Dosya Biçimleri ve Önizleme Videosu (Türkçe)

STL, OBJ ve 3MF farkları, yayınlamadan önce kontrol listesi ve modelden MP4 önizleme videosu oluşturma.

Materials, settings and pricing

PLA vs PETG vs ABS vs ASA vs TPU

Temperatures, strength, drying and a four-question choice method.

3D Printing Supports Explained

Overhangs, tree supports, settings and design tricks.

How to Price 3D Printed Products

Cost formula with a worked example.

Choosing Nozzle Size and Layer Height

The 25–75% rule and typical uses of 0.2 to 0.8 mm nozzles.

Your First 3D Print: Beginner Checklist

From file check to finished part.

PLA, PETG ve ABS Filament Farkları (Türkçe)

Filament karşılaştırması ve seçim rehberi.

3D Baskı Fiyatı Nasıl Hesaplanır? (Türkçe)

Maliyet formülü ve örnek hesap.

Printing, licences and photography

Best 3D Print Orientation: How to Choose the Right Way Up

Strength, surface, supports and time, with a five-step method.

Common 3D Print Problems and How to Fix Them

Warping, stringing, weak layers, shifted layers and more, by symptom.

3D Model Licenses Explained

Personal, commercial and Creative Commons terms in plain language.

How to Photograph 3D Prints

Light, backgrounds, scale and angles with just a phone.

STLtoMP4 FAQ

Quick answers about privacy, formats, camera tour, scenes and phones.

Previews, renders and selling

How to Make a Turntable Video of a 3D Model

Step-by-step guide to a smooth, loopable turntable video of a 3D model: preparation, lighting, camera, duration, resolution, bitrate and file size.

Lighting, Colour and Material Choices for 3D Model Renders

How to light and colour 3D model previews so they look like the real print: key and fill light, shadows, matte vs glossy, backgrounds and honest colour.

Best Image Sizes and Views for 3D Print Listings and Social Media

Which views, aspect ratios, resolutions and file formats work best for 3D model listings, marketplaces, Instagram, Reels, TikTok and YouTube.

MP4 vs GIF vs WebP: Which Format for 3D Model Previews?

Compare MP4, GIF and animated WebP for 3D previews: file size, quality, colours, transparency, looping and where each format is accepted.

How to Write a 3D Model Listing That Sells

A practical structure for 3D model listings: titles, opening lines, technical details, images, licence terms and how to improve from buyer questions.

How we write these guides

Each guide aims to be useful on its own, with concrete numbers and checklists that you can apply the same day. Values such as densities, bitrates and tolerances are typical figures; printers, filaments and platforms differ, so confirm them against your own equipment and the current rules of the sites you use. When we learn something that changes a recommendation, we update the guide and its date.